|Air Inlet Size:||1/4 in.|
|Depth of Drive:||Adjustable|
|Dry Fire Lockout:||Yes|
|Fastener Type:||Brad Nails|
|Firing Modes:||Contact / Sequential Actuation|
|Jam Clearance:||Open Nose|
|Magazine Type:||Side Loading|
|Max. Fastener Length:||2-1/8 in.|
|Min. Fastener Length:||5/8 in.|
|Operating Pressure - PSI:||70 - 120|
Do you have questions about this product?
get answers from real customers and in-house experts with AnswerBox.
Q:I bought an 18 gauge nail gun, loaded and attached to the compressor, the trigger works, makes a noise but no nail is coming out. I checked, it isn't jammed. seems like the brads are not getting to the end or something. what am I missing?
Q:Does it need a battery or compessor
A:That unit runs off an air compressor.
Q:are there galvanized brad that will work with this gun?
Q:will this model and 2 1/8" nails work well on 6" tongue n groove ceiling on patio ceiling?
A:Obviously without knowing the thickness of the material, and what the substrate you are nailing into, no one can answer that question. But assuming T&G is 3/4" thick, and you are nailing into 2x structure, or 3/4" plywood, yes this nailer would work. Fastener length depends again on the thickness of the T&G material. You need minimum 1"+ penetration into the solid substrate.
Q:you show a 5/8", 1", 1 3/8" 18 ga. brad but not a 1 1/2", thru 2 1/8" that if I understand the info this nailer U/BT1855K18 should take?
A:Bostitch model number BT1855K will accept 18 gauge brad nails ranging from 5/8-in to 2-1/8-in long.
|Includes:||18-Gauge Brad Nailer - BT1855K,
1/4 in. swivel air fitting,
1000 fasteners 2 in. brads
|18-Gauge Brad Nailer - BT1855K-R,
|Availability:||In Stock||In Stock|
|Warranty:||7 Year Limited||1 Year Limited|
|You Save:||N/A||$22.00 (31%)|
Stanley Fastening Systems, L.P. 7 Year Limited Warranty (1 Year for Reconditioned Products) - U.S. and Canada Only
Effective December 1, 2005 Bostitch, L.P. warrants to the original retail purchaser that the product purchased is free from defects in material and workmanship, and agrees to repair or replace, at Bostitch's option, any defective Bostitch branded pneumatic stapler or nailer for a period of seven (7) years from date of purchase (one (1) year from the date of purchase for reconditioned pneumatic staplers or nailers and for new and reconditioned compressors and tools used in production applications). Warranty is not transferable. Proof of purchase date required. This warranty covers only damage resulting from defects in material or workmanship; it does not cover conditions or malfunctions resulting from normal wear, neglect, abuse, accident or repairs attempted or made by other than our national repair center or authorized warranty service centers. Driver blades, bumpers, o-rings, pistons and piston rings are considered normally wearing parts. For optimal performance of your Bostitch tool always use genuine Bostitch fasteners and replacement parts.
This warranty IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES AND with respect to compressors and tools used in production applications, limits to a period of one (1) year from the date of purchase all implied warranties INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. BOSTITCH SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.
Some states and countries do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state and country to country.